This Electro-Motive desk model
of a 20-645 EMD turbocharged engine with an AC/DC alternator was
produced from approximately the 1960s to the 1990s. It is of molded
plaster construction, and is approximately 1:32 scale.
**********
This Electro-Motive desk model
of a 20-645E7 EMD turbocharged diesel engine skid mounted with
reversing reduction gear and accessory rack was produced from
approximately the 1970s to the 1990s. It is of molded plaster
construction in 1:48 scale.
Two photos above courtesy
of Phil Russell
**********
These Electro-Motive desk models
are of 16-645E1 Roots blower type engines, skid mounted with AC
electric generators. Approximate period of construction was from
the 1970s to the 1990s, they are of molded plaster construction,
in 1:48 scale. They have a curious mistake, the engines all have
turbocharger oil filters at the rear of the right bank of cylinders.
These filters were not used on EMD Roots blower engines.
Photo above by Preston
Cook
**********
The Walthers Hobby Shop EMD 567
engine is produced as a styrene kit in 1:87 HO model railroad
scale, and shows the engine equipped with a typical locomotive
style main generator. It is suitable as a desk model, a display
item, a detailing part, or a flatcar load on a model railroad.
The model was still available from Walthers recently, their link
for the description of this product is shown below:
http://www.walthers.com/exec/productinfo/933-3119
**********
CLICK
HERE TO RETURN TO THE ENGINE MODELS INDEX
